The Kingspan TEK Building System is available via a network of approved Delivery Partners (link to page) that are responsible for the design and erection of each specific project. A full list of approved UK, Irish and international Delivery Partners is available from the Delivery Partners page.
The Kingspan TEK Technical Services Department offers free design advice regarding the performance and suitability of the Kingspan TEK Building System for any given project.
The Kingspan TEK Technical Services Department can also perform a wide variety of relevant calculations including: U-values*; condensation risk analysis**; SAP Ratings and Energy Performance Certificates (EPCs) in the UK; and DEAP and Building Energy Rating Certificates (BER) in the Republic of Ireland.
The department can also offer advice on subjects such as ventilation, heating systems, BREEAM ratings and Code for Sustainable Homes ratings.
Enquiries should be directed to a Kingspan TEK Building System Delivery Partner for the following:
- specific structural engineering design advice;
- to convert a drawing (including plans and elevations) into a Kingspan TEK Building System design scheme;
- quotations and lead times.
* Calculations performed to BS / I.S. EN ISO 6946: 2007 (Building components and building elements. Thermal resistance and thermal transmittance. Calculation method) and using the conventions set out in BR443 “Conventions for U -value calculations”.
** Calculations performed to BS 5250: 2002 (Code of practice for control of condensation in buildings).
|
