Kingspan TEK Building System
Search
Home | Privacy Statement | Site Map | Contact   
Kingspan TEK website header image
Introduction Case Studies Literature Design Space Environmental Sustainability Delivery Partners
Energy Efficiency Services / Lining Cladding Options Building Process Financial Advantages Building System Panel Data Kingspan Insulation

Service Integration

Kingspan TEK Building System using a vertical batten to create a service cavity Kingspan TEK Building System using a chased layer of plasterboard to create a service cavity

Figure 8
Minimum 12.5 mm vapour check* plasterboard on 25 mm timber battens†.

 

Figure 9
Minimum 12.5 mm vapour check* plasterboard on 19mm gypsum Plank or 12.5mm plaster board.
     
Kingspan TEK Building System with layer of plasterboard fixed directly to OSB/3 face  

The minimum plasterboard requirement may vary subject to statutory requirements for fire and acoustics.

The need for electrical sheathing / conduit should be assessed in accordance with Building Regulations/ Standards and BS 7671: 2001

Figure 10
Minimum 12.5 mm vapour check* plasterboard fixed direct to the Kingspan TEK Building System.

    
® Kingspan, TEK, the TEK Device, the House Device, the ZO device and the Lion are Registered Trademarks of the Kingspan Group plc in the UK, Ireland and other countries. All rights reserved.

® Kingspan  1999 - 2010 
Kingspan TEK